|
Avalanche Pulser Summary
|
Standard Range
|
Pulser
|
Amplitude into 50Ω
|
Rise time
Pulse width |
PRF |
RMS jitter |
Features |
Options |
PDF Data Sheet or manual available |
APG1 |
>100V |
10kHz |
10ps |
S/D |
|||
ASG1 |
>200V |
1kHz |
10ps |
St/D |
|||
SPSV |
>1kV |
100Hz |
10ps |
S/D |
remote control of pulse lengths |
||
>2kV |
1kHz |
20ps |
/S/100ps rise time |
||||
CPS2 |
>4kV |
150ps/2ns decay |
100Hz |
20ps |
|||
CPS3 |
>6kV |
10Hz |
20ps |
/S |
|||
HMP1 |
>4kV |
100Hz |
10ps |
/S/D/Q/V/F |
|||
|
HMP2
|
>4kV x 2
|
100ps/5ns
|
100Hz
|
10ps
|
2 ch
|
/S/D/Q/V/F
|
|
PBG1 |
>6.5kV |
100ps/5ns |
100Hz |
10ps |
/S/D/V/F |
||
>8.5kV |
100ps/5ns |
100Hz |
10ps |
S/D/V/F150ps/3ns |
|||
PBG3 |
>12.5kV |
100ps/5ns |
100Hz |
10ps |
/S/D/V/F |
||
| >24kV | 130ps/3ns | 1kHz |
20ps |
* |
|||
>45kV |
150ps/3ns |
500Hz |
20ps |
* |
Features and Options
/S Shaped pulse
/St Step pulse
/D Internal switchable delay, rate generator, trigger indicator,
/Q Faster rise time (quick)
/V Variable output (approximately 60% on HMP and 65% on PBG to 100%
/F 1kHz repetition rate (some pulsers can achieve this without this option, consult factory)
Units are available with multiple synchronous outputs,
e.g. a PBG5 will drive sixteen 50Ω outputs to 6.4kV
* Available with balanced 200Ω outputs and other options. Consult with factory about your requirements
Voltages are into 50Ω, both positive and negative outputs are available but are fixed during manufacture.